Tillotson 212

Tillotson 212 gets some timing advance/7 degree flywheel key Advanced the timing on the 212 Tillotson engine with a 7-degree flywheel keyway. This is the same keyway I usually use on the predator 212 as well.

Juggernaut vs 30 series on a Mild Tillotson 212 Compared a Juggernaut driver on the Tillotson 212 on the Baja racer/ Doodlebug minibike with a standard 30 series driver to see which would perform better on a mildly built engine. The Tillotson engine has a mod 3 cam with 22lb valve springs, a Mikuni carburetor, and a header pipe.

24-volt Razor dune buggy gets a Tillotson 212 Swapped out the 24V 250-watt electric motor on the Razor Dune buggy go-kart for a Tillotson 212 engine from GoPowerSports

Tillotson 263 BUDGET build and road test Built a Tillotson 263, 3-inch stroker motor. Used a 76MM Tillotson block and an EC carburetor 263 stroker kit. Installed the engine on a 2008 CRG racing kart frame.

When you run a 3-foot-long intake manifold on your minibike Tested a 3-foot long intake manifold on the Tillotson 212 powered Doodlebug minibike to see if the bike would be any faster with the long intake manifold.

ISKY .330 cam in the Tillotson 225 how will it run? Installed a Volts Mini bikes .330 cam in the Tillotson 225 powered Mega Moto 80/105 minibike to see how it would run compared to Paul's karts PKRPM cam.

Noram Cheetah Racing clutch vs max-Torque Did some zero to thirty and top speed runs with the Doodlebug mini bike and a 15 tooth max-torque clutch and then changed out the clutch with a Noram Cheetah racing clutch to see if it would improve performance. Tillotson 212 with a 265 cam 22lb springs, billet rod and flywheel,.010 head gasket. 24MM flat slide carburetor and a header pipe.

Will a NIBBI 24MM carb outperform a 28MM D-Slide on a Tillotson 225? Compared a 28MM D-Slide carburetor against a NIBBI 24MM slide carburetor on the Tillotson 225-powered Mega Moto 212 minibike.

Drag pipe versus 3 stage header on the Tillotson 212 Installed an F&B 3 stage drag pipe and a GoPowerSports 3 stage pipe on the Tillotson 212 on the Doodlebug minibike , and compared the difference in performance between the two on a mildly built engine.

Will a Pit bike exhaust make a Tillotson 225 faster? Installed a pit bike exhaust on the Tillotson 225-powered Mega Moto 212 minibike to see if there would be any difference in performance from the PLV exhaust.

28MM slide carburetor on the Tillotson 225 Installed a 28MM slide carburetor on the Tillotson 225-powered Mega Moto 212 minibike to see if it would outperform the VM22 Carburetor the Tillotson 225 came with.

Tillotson 212e gets a billet flywheel and more top speed? Installed a Slipstream Billet flywheel in the Tillotson 212 on the Doodlebug/ Baja Racer minibike . Did a top speed run to see if the flywheel installation made any difference in performance?

Mod 3 cam vs Tillotson 212 E cam Predator 212 Hemi Did a top speed and zero to thirty run with the Predator 212 on the Coleman cc100x minibike with a Tillotson e cam. Swapped the Tillotson cam for a Mod 3 cam to see if there was any performance difference between the cams.

Mod 3 cam and ARC billet rod install on a Tillotson 212 Installed a Mod 3 cam and ARC 6773 billet rod in the Tillotson 212 engine on the Baja racer/ Doodlebug minibike . Did some top speed runs to see if adding the parts added any top speed?

ig Valve vs Small Valve: Tillotson 212 Head Battle! Tested the stock Tillotson head against a 14cc small valve standard head on the Tillotson 212-powered mini bike.